Canon EOS R 全片幅無反相機詳細規格曝光？3030萬像素CMOS

•SD speed class-compatible

•UHS speed class-compatible

•High-speed writing is supported when a UHS-I compatible SD card is used.

•Compatible with Eye-Fi cards.

•Multimedia cards (MMC) cannot be used (card error will be displayed).

When using Mount Adapter EF-EOS R: Canon EF or EF-S lenses (excluding EF-M lenses)

•Removes dust adhering to the low- pass filter.

•At power off only / Enable / Disable. Performed automatically (taking about 3 .0 sec. as indicated on the screen) or manually (taking about 9.0 sec. as indicated on the screen).

•After manually activated cleaning , the camera will automatically restart (Power OFF to ON).

•When [Multi Shot Noise Reduction],[Multiple exposures], or [HDR mode] is set,[Clean now] and [Clean manually] cannot be selected.

(2) Dust Delete Data acquisition and appending

•The coordinates of the dust adhering to the low- pass filter are detected by a test shot and appended to subsequent images.

•The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.

•Not available with EF-S lenses, in cropped shooting or when distortion correction is applied.

(3) Manual cleaning (by hand)

Large/RAW/C-RAW: 6720 x 4480

Medium: 4464 x 2976

Small 1: 3360 x 2240

Small 2: 2400 x 1600

1x (Crop)

•Values for Recording Pixels are rounded to the nearest 100,000 or 10,000.

•For RAW and JPEG images, information outside the cropping area is not retained.

•JPEG images are generated in the set aspect ratio.

•RAW images are generated in [3:2], and the set aspect ratio is appended.

Large/RAW/C-RAW: 4176 x 2784

Small 2: 2400 x 1600

4:3 Aspect Ratio

Large/RAW/C-RAW: 5952 x 4480* Medium: 3968 x 2976

Small 1: 2976 x 2240*

Small 2: 2112 x 1600*

16:9 Aspect Ratio*

Large/RAW/C-RAW: 6720 x 3776

Medium: 4464 x 2512

Small 1: 3360 x 1888

Small 2: 2400 x 1344

1:1 Aspect Ratio

Large/RAW/C-RAW: 4480 x 4480

Medium: 2976 x 2976

Small 1: 2240 x 2240

Small 2: 1600 x 1600

* Indicate an inexact proportion.

1File numbering methods

1Continuous numbering

1The numbering of captured images continues even after you replace the card.

2Auto reset

1When you replace the card, the numbering will be reset to start from 0001. If the new SD card already contains images, the numbering will continue from the last recorded image in the card.

2Manual reset

1Resets the file number to 0001, and creates a new folder automatically.

Simultaneous Recording

2Standard (3) Portrait

(4) Landscape (5) Fine Detail

(6) Neutral ( 7 ) Faithful

1Monochrome

2User Defined 1–3

•In Scene Intelligent Auto,[ Auto] will be set automatically.

•[Standard] is the default setting for [User Def. 1–3].

1Shade

2Cloudy*

3Tungsten light

4White f luorescent light ( 7 ) Flash

(8) Custom (Custom WB) (9) Color temperature

* Effective also in twilight and sunset.

Corrected in reference to the current WB mode’s color temperature.

*1 Viewfinder coverage may become more than 100% (up to 100.36%).

*2 Viewfinder coverage may become more than 100% (up to 100.5% of viewfinder coverage).

2Number of remaining multiple exposures

3HDR shooting

4Multiple-exposure shooting

5Dual Pixel RAW shooting

6Multi Shot Noise Reduction

7Digital Lens Optimizer

8AF method

9AF operation

10Drive mode

11Metering mode

12Anti-flicker shooting

13Shooting mode

14Scene icons

15AE lock

16Flash-ready

17Flash off

18FE lock

19High-speed sync

20Shutter speed

21Multi-function lock warning

22Aperture

23Lens information

24Exposure level indicator

25Exposure compensation

26Highlight tone priority

27ISO speed

28Possible shots

29Number of self-timer shooting

30Maximum burst

31Battery level

32Exposure simulation

33AEB

34FEB

35Still photo cropping

36Aspect ratio

37Auto Lighting Optimizer

38Picture Style

39White balance

40White balance correction

41Image Quality

42Bluetooth® function

43Wi-Fi® function

44Histogram

45Electronic level

When selected with cross keys.

(3) Manual (Manual focus)

2Disable

3LED AF assist beam only

•Focus range with the AF-assist beam is generally no more than 13.1 ft. / 4m (at f/5.6).

1Evaluative metering (AF point-linked)

2Partial metering (approx. 6.1% of the area at the center of the screen)

3Spot metering (approx. 2.7% of the area at the center of the screen)

•AF point-linked spot metering not provided.

(4) Center-weighted average metering

2Flexible-priority AE

3Program AE (shiftable)

4Shutter-priority AE (Safety shift possible)

5Aperture-priority AE (Safety shift possible)

6Manual exposure

7Bulb

8Custom shooting mode C1, C2, C3

•For [Highlight tone priority], the settable ISO speed range will be ISO 200 to 40000.

•ISO speed safety shift possible with Custom Function.

•All the expanded ISO speeds, even for movies, are only “equivalent speeds.” Auto

* 1 It depends on [Minimum] and [Maximum] of [ISO speed settings][Range for stills].

([AF frame size] can be set to [Small])

(If there are faces in the area, they take precedence.)

(Above, below, left and right/Around)

(If there are faces in the area, they take precedence.)

Large Zone AF (Vertical/Horizontal)

(Prioritizes subjects at close range, but any faces in the area take precedence.)

•The metering mode for AE lock after focus can be customized.

2Manual AE lock

•In the Fv, P, Tv, Av and M modes, enabled with the AE lock button. (Press again to update.)

•Enabled in all metering modes.

1Electronic first curtain, mechanical second curtain

2Electronic shutter (slit rolling read out)

3Mechanical first and second curtain

With the aperture stopped down by 3 stops or less from the open aperture. Without flash.

If the SW-1 and SW-2 are pressed simultaneously, release time lag will be long.

The release time lag may become further longer depending on shooting conditions, such as when shooting in a dark environment.

•Flash firing , E-TTL II Flash metering , Slow synchro, Safety FE, Flash mode, Wireless function, Flash zoom, Shutter synchronization and Flash exposure compensation

1Flash Custom Function setting

•The setting options for both (1) and (2) will differ depending on the Speedlite used.

2High- speed continuous shooting

•Max. approx. 8 .0 fps

•The conditions are attaining the maximum continuous shooting speed are as follows:

•Shooting with a fully charged batter y in One-Shot AF mode at a 1/1000 sec. or faster shutter speed and maximum aperture (depending on the lens), at room temperature

•In One-Shot AF mode with Image Stabilizer off when using these lenses: EF 300 mm f/4 L IS USM, EF 28 –135mm f/3 . 5 –5.6 IS USM, EF 75 –300 mm f/4 –5.6 IS USM, EF

•The continuous shooting speed for high- speed continuous shooting may be lower,

•The maximum continuous shooting speed may be lower when using a cold batter y in cold environments or when the batter y level is low, at approx. 6.0 shots/sec.

•With Ser vo AF: Max. approx. 5.0 fps (shooting speed priority)[Silent LV shooting: Mode 1]

•With Servo AF, the maximum continuous shooting speed may become slower depend- ing on subject conditions or the lens used. Also, the maximum continuous shooting

•Max. approx. 3 .0 fps

•With Dual Pixel R AW: Max. approx. 2 . 2 fps

•High- speed continuous shooting not possible.

( 73 °F/23 °C), with f licker reduction, Dual Pixel R AW shooting and Digital Lens Optimizer disabled.

100 – 400 mm f/4. 5 –5.6 L IS USM.

depending on conditions such as these: batter y level, temperature, f licker reduction, Dual Pixel R AW shooting , shutter speed, aperture, subject conditions, brightness, AF operation, type of lens, use of f lash and shooting settings.

speed will become slower when setting the [LV silent shooting ] to [Disable]. (3) Low- speed continuous shooting ( Tracking priority)

(4) Self-timer: 10 sec./remote control (5) Self-timer: 2 sec./remote control

•The file size, number of possible shots and maximum burst vary depending on shooting conditions (aspect ratio of 3:2, subject, memory card brand, ISO speed, Picture Style, Custom Function, etc.)

•“Full” indicates that shooting is possible until the card becomes full.

2Manual focus

•Magnified view possible by approx. 5x or 10x for manual focusing (not possible during movie shooting).

•Metering brightness range: EV -1 – 20 (at 73°F/23°C, ISO 100)

2AF point-linked evaluative metering

•For face detection with Face detection + Tracking AF.

(2) 3×3

(3) 6×4

(4) 3×3+diag

Video: MPEG-4 AVC / H.264

•Variable (averaged) bit rate Audio:

ALL-I: Linear PCM IPB: AAC

3840 x 2160

•If the recording time reaches 29 min. 59 sec. (or 7 min. 29 sec. for a HD High Frame Rate Movie), the movie shooting will stop automatically.

•There is no restriction to automatically stop movie shooting even when the file size reaches 4 GB.

•When the compression method for movie recording quality is IPB or IPB (Light)(audio: AAC), sound will not be recorded for approx. the last two frames.

•When you play back movies on Windows, movie images and sound may become slightly out of synchronization.

3840 x 2160

24.00 fps

23.98 fps

3444 MB/min.

860 MB/min.

1298 MB/min.

431 MB/min.

24.00 fps

23.98 fps HDR Movies

654 MB/min.

216 MB/min.

(Light)

min.

87 MB/min.

1144 MB/min.

583 MB/min.

min.

187 MB/min.

min.

94 MB/min.

•Even if ISO speed range is altered with [ISO speed settings], the setting is not effective for the normal ISO speed range.

•[ISO speed settings] is effective to set the maximum ISO speed for the ISO expansion.

•Manual setting of ISO speed

•Normal ISO speed range and Maximum ISO speed with the ISO expansion can be manually set within the range set with [ISO speed settings].

•Expanded ISO speeds: H1 (ISO 51200 equivalent), H2 (ISO 102400 equivalent). Note that L (ISO 50) cannot be set.

•The expanded ISO speeds are only “equivalent” ISO speeds.

•For HDR movie shooting, an expanded ISO speed cannot be set. The maximum will be ISO 25600.

3.15 in./8.01cm diagonal (2.63 in./6.67cm width, 1.75 in./4.44cm height)

•Anti-smudge coating applied.

•Anti-reflection coating not applied.

1/3-stop increments

1/3-stop increments

•No information display

•Basic information display

•Detailed shooting information display

•Detailed information

•Lens/Histogram information

•White balance information

•Picture Style information 1

•Picture Style information 2

•Color space/Noise reduction information

•Lens aberration correction information 1

•Lens aberration correction information 2

•Record of sent images

•GPS information

•IPTC information

2Index display

•4-image index

•9-image index

•36-image index

•100-image index

Display selection is available for Basic information display and Shooting information display.

2Select range

3All images in a folder

4All images on card

•Image browsing and image search can be based on ratings.

•Ratings-based image selections also possible with DPP.

5All found images (only during image search)

1Select images to erase

2Select range

3All images in folder

4All images on card

5All found images (only during image search)

Channels: 1 to 11 channels

2Infrastructure mode

Remote control of the camera using a smartphone is possible depending on the Camera Connect specifications.

Images can be sent to a smartphone.

A link to a CiG album can be emailed.

Customizable Dials

•Hexadecimal 26 digits

•ASCII 5 characters

•ASCII 13 characters

Safety lock: Enable / Disable

•Up to five My Menu tabs can be added.

•For PC communication

•For WFT-E7 (Ver. 2) connection

•Shared with terminal for in-camera charging with the USB Power Adapter PD-E1.

•In-camera charging: although it is compatible with USB Type-C (5V/1.5A) equivalent, do not charge the camera other than with the USB Power Adapter PD-E1.

•Images can be displayed through the HDMI output and on screen at the same time.

•Images will not be displayed unless [NTSC] or [PAL] is properly set according to the video system of the TV set.

•With the AC Adapter + DC Coupler, AC power is possible.

•When the Battery Grip BG-E22 is used, two battery packs (LP-E6N or LP-E6) can be installed.

•With the USB Power Adapter PD-E1, in-camera charging of LP-E6N is possible but LP-E6 cannot be charged. The USB Power Adapter PD-E1 is not compatible with powering the camera.

•Deleting tabs in a batch

•Deleting all tab items

•Setting the menu display

•Sorting registered items

•Deleting selected registered items

•Deleting registered items in a batch

•Deleting tabs

•Changing a tab name (16 ASCII characters)

•With LP-E6, possible shots, possible shooting time and playback time will be approx. 95% of the figures above.

•Battery level can be checked on the LCD panel and in the viewfinder.

•One of six levels displayed for LP-E6N and LP-E6. The display for other power sources is different.

Display off

Available time options: 15 sec. / 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min.

Auto power off

Available time options: 30 sec. / 1 min. / 3 min. / 5 min. / 10 min.

Disable Viewfinder off

Available time options: 1 min. / 3 min. / Disable

•At least approx. 6 min. until auto power off while the [Date/Time/Zone] screen is displayed.

When fully-charged, the date/time can be maintained for approx. 3 months

•Recharge time: approx. 8 hrs.

o The recharge time required to provide the above number of months with no battery pack installed.

•Based on CIPA testing standards.

Body only

1 pc

Temperature (73°F / 23°C)

(32°F / 0°C)

(73°F / 23°C)

(73°F / 23°C)

(32°F / 0°C)

2 pc

(73°F / 23°C)

(32°F / 0°C)

(73°F / 23°C)

Temperatures (32°F / 0°C)

•Based on CIPA standards.

Approx. 5.35 x 3.87 x 2.67 in. / 135.8 x 98.3 x 67.7mm (from grip to monitor)